|
Post by alandmor on Mar 10, 2018 13:39:29 GMT -8
Thanks much for the replies. I will give the suggestions a try. The BioQuip sounds like a good option and I know where to find that (but missed it in my frequent shopping there). Do we think the HP Paper is the "Q6608A"? I'll try both in my laser printer and see if they both perform well. Appreciate the insights. Eric I have now tried the HP 200g (52 lb.) glossy brochure paper (Q6608A) on a color laserwriter printer and have to agree with the previous comments. They're the best looking labels I've seen. The lettering (Arial, 3.5 point) is clear and crisp, the paper cuts cleanly, holds a pin well, and I like the glossy look. Highly recommended.
|
|
|
|
Post by alandmor on Feb 12, 2018 8:56:00 GMT -8
See below for a recent thread about label paper and printing labels from another entomology forum. I have purchased some of the 200g glossy HP brochure paper but have not tried it yet. Apparently it has the approval of the Smithsonian Institution's archive folks and is used by several collection managers on color laser printers with good results.
=============================================================
From: Entomological Collections Network Listserve [mailto:ECN-L@LISTSERV.UNL.EDU] On Behalf Of Michael S Caterino Sent: Friday, December 01, 2017 8:59 AM To: ECN-L@LISTSERV.UNL.EDU Subject: Re: Pinned Label Paper
I second this. We tried the glossy brochure paper starting about a year and a half ago, following Matt’s recommendation, and have used it ever since. I’m a big fan. Agree too on the color laser doing a much better, higher resolution job than any black & whites at our disposal.
3 pt is way too small though!
Mike
------------------------------------------------------------------ Michael S. Caterino Morse Chair of Arthropod Biodiversity Director, Clemson University Arthropod Collection Department of Plant and Environmental Sciences (PES) MAIL: 277 Poole Agricultural Center OFFICE: E-254 Poole Agricultural Center Clemson University Clemson, SC 29634-0310 mcateri@clemson.edu Office phone: (864) 656-3105 LAB: sites.google.com/site/caterinolab/ MUSEUM: sites.google.com/site/clemsonarthropodcollection/ ------------------------------------------------------------------
On Dec 1, 2017, at 11:01 AM, Buffington, Matt <Matt.Buffington@ARS.USDA.GOV> wrote:
Crystal,
It depends on the printer.
We use 200g glossy HP brochure paper, and run this through a color laser jet (even though we only use black). Color laser jets using an entirely different kind of pigment that polymerizes to smooth surfaces. Its super durable, does very well in ethanol and PG, and the labels are ultra crisp. I routinely print at 3pt font now, and its very legible. Let me know and I can send you the ordering info. Also, we are using a Brother 4570 CDW networked printer.
The brochure paper was tested by the SI archives folks and passed their approval. This paper is calendared, meaning the core of the paper is fibrous, but the surfaces are rolled ultra smooth (glossy, like magazines). Lastly, the 200g paper grips pins very well, and I have tried removing/replacing labels, using the original holes, and the firmness of the labels remains true.
Matt
Matthew L. Buffington, PhD Hymenoptera Unit, Systematic Entomology Lab, USDA c/o National Museum of Natural History Smithsonian Institution POB 37012 NHB, CE519, MRC 168 Washington, DC 20013-7012 U.S.A.
202-633-4552
On Dec 1, 2017, at 10:31 AM, Crystal Maier <cmaier@fieldmuseum.org> wrote:
Hi All -
What does everyone use for their pinned label paper? Currently at the Field, we've been using "100% rag long grain sub 52 lbs" The only trouble is, I cannot find this paper or anything even similar anywhere.
I'm just trying to get a feel for some tried and tested alternatives that other collections use.
Thanks!
Crystal
--
Crystal A. Maier, Ph.D.
Insects Collection Manager Field Museum of Natural History
1400 S. Lake Shore Dr. Chicago, IL 60605 312.665.7745 Twitter: @dryopoiddarling Skype: Crystal.A.Maier
|
|
|
Post by alandmor on Dec 27, 2017 14:36:44 GMT -8
A new book by G. Beinhundner on the Cetoniinae of Africa, 2017, 1199pp: "It is huge book including all the African Cetoniinae (excl. Madagascar) except for three species which are known from type specimens only. All the available colour or shape varietes are shown on colour pictures. All the important references to each species are given. The book was published by the author himself as digital print and carefully hard bound." It's not cheap at 320 Euros but from the plates figured it appears worth the investment. kabourek.cz/vypis_c_detail.php?TBK=1&N=&KC=865&R=
|
|
|
Post by alandmor on Dec 25, 2017 7:16:47 GMT -8
Specimen in question sold for $312.21.
|
|
|
Post by alandmor on Aug 30, 2017 9:29:22 GMT -8
I recently had to move my Coleoptera collection (Cornell drawers in open-faced cabinets) into a finished basement where the relative humidity, at least this summer, is generally 55-65%. I'm curious what the recommended relative humidity is and if a dehumidifier may be advised. Thanks in advance for any replies.
|
|
|
Post by alandmor on Aug 28, 2017 11:23:16 GMT -8
|
|
|
|
Post by alandmor on Jun 17, 2017 8:00:32 GMT -8
|
|
|
Post by alandmor on May 4, 2017 7:30:14 GMT -8
|
|
|
Post by alandmor on Nov 16, 2016 12:01:15 GMT -8
To anyone interested, there is a recent review article by Wilches et al., 2016, titled: A review of diapause and tolerance to extreme temperatures in dermestids (Coleoptera), Journal of Stored Products Research, 68: 50-62 (attached). Wilches -2016-review.pdf (426.48 KB) From the Abstract: Numerous species in Family Dermestidae (Coleoptera) are important economic pests of stored goods of animal and vegetal origin, and museum specimens. Reliance on chemical methods for of control has led to the development of pesticide resistance and contamination of treated products with insecticide residues. To assess its practicality as an alternate method of control, we review the literature on the tolerance of dermestids to extreme hot and cold temperatures. The information for dermestid beetles on temperature tolerance is fragmentary, experimental methods are not standardized across studies, and most studies do not consider the role of acclimation and diapause. Difficulties in determining the diapause status of dermestid larvae may explain the lack of studies. The few studies that do examine these factors show that they can greatly increase tolerance to cold temperatures. The use of extreme temperatures will need to target the most tolerant life stage, which for dermestids at cold temperatures will potentially be the cold-acclimated individuals in diapause. The development of effective protocols will be facilitated by studies that clearly and completely describe experimental and statistical methods, consider factors (life-stage, acclimation, diapause) that increase tolerance to extreme temperatures, and assess the mortality at various temperatures to develop mathematical models.
|
|
|
Post by alandmor on Jul 22, 2016 11:05:18 GMT -8
It's something I've never seen before but as you surmised, not uncommon. From a collector friend in AZ:
"Yes—relatively common here in Phoenix in species from very humid areas once they are dried more than previously."
|
|
|
Post by alandmor on Jul 17, 2016 13:24:38 GMT -8
I recently saw some of Sean Goddard's insect sculptures at a local arts and crafts show. He works in metal and glass from his studio in Salt Spring Island B.C. His pieces, mostly of beetles on the wing are stunning and quite realistic with an artistic flair. See more for yourself at www.seangoddardinsects.com/Attachments:
|
|
|
Post by alandmor on Jul 5, 2016 7:11:28 GMT -8
Link to "after" photo is broken. Maybe need to re-post separately.
|
|
|
Post by alandmor on Jun 13, 2016 13:34:42 GMT -8
You got to love it when someone turns the tables on the Department of Fish and Wildlife, in this case the Oregon DFW. Read the letter ODFW received from landowners when asked if ODFW could conduct a survey for the yellow-legged frog on their property. Priceless; even if it was done in jest! Link and full text are below.
www.oregonlive.com/trending/2016/06/oregon_couples_letter_to_fish.html======================================================== Thank you for your inquiry regarding our property to survey for the yellow-legged frog. We may be able to help you out in this matter.
We have divided our 2.26 acres into 75 equal survey units with a draw tag for each unit. Application fees are only $8.00 per unit after you purchase the "Frog Survey License" ($120.00 resident/$180 Non-resident). You will need to obtain a "Frog Habitat" parking permit ($10.00 per vehicle). You will also need an "Invasive Species" stamp for the vehicle ($15.00 for the first vehicle and $5.00 each add'l vehicle). You will want to also register at the check station to have your vehicle inspected for non-native plant life prior to entering our property. There is also a Day Use fee ($5.00 per vehicle).
If you are successful in the Draw you will be notified two weeks in advance so you can make necessary plans and purchase your "Creek Habitat" stamp. ($18.00 Resident / $140.00 Non-Resident). Survey units open between 8am and 3pm but you cannot commence survey until 9am and must cease all survey activity by 1pm.
Survey Gear can only include a net with a 2″ diameter made of 100% organic cotton netting with no longer than an 18″ handle, non-weighted and no deeper than 6′ from net frame to bottom of net. Handles can only be made of BPA-free plastics or wooden handles. After 1pm you can use a net with a 3″ diameter if you purchase the "Frog Net Endorsement" ($75.00 Resident / $250 Non-Resident). Any frogs captured that are released will need to be released with an approved release device back into the environment unharmed.
As of June 1, we are offering draw tags for our "Premium Survey" units and application is again only $8.00 per application. However, all fees can be waives if you can verify "Native Indian Tribal rights and status.
You will also need to provide evidence of successful completion of "Frog Surveys and You" comprehensive course on frog identification, safe handling practices, and self-defense strategies for frog attacks. This course is offered online through an accredited program for a nominal fee of $750.00.
Please let us know if we can be of assistance to you. Otherwise, we decline access to our property but appreciate your inquiry.
Sincerely,
Larry & Amanda Anderson
|
|
|
Post by alandmor on May 13, 2016 8:49:52 GMT -8
|
|
|
Post by alandmor on May 8, 2016 8:21:11 GMT -8
I too have imported dead material two times before this(through ebay)with no problem without form and no one told me anything. I figured that if a form was needed, ebay, or someone, would notify me. Does the form have to be shipped with the package? Where do I send the completed form? I would gladly have filled it out if I knew about it. Is the $100 licence mandatory? Thank you, Tim Follow the "Policy" link in the InsectNet.com web page header for info and links to USDA, USFW and CITES import requirements: www.insectnet.com/policy.htm
|
|